Liquid Controls SP3850 - Manual (Page 29)

25
SP3850 Flow Computer
Sub-menus Display Notes
6.3.6
SETUP
INDICATORS
(Temperature)
Press ENTER when Rate is flashing to
configure the Ratemeter Indicators
Select the desired Rate Time Base.
Enter the desired Descriptor for the
Ratemeter.
Select the desired Rate Decimal Place.
0-3 decimal places allowed.
Enter desired Rate Averaging Filter.
Enter desired Percent of Change for Quick
Update. If the current flowrate deviates by an
amount greater than the percentage value
entered, the Rate Averaging is restarted with
new value.
Press ENTER when Temp is flashing to
configure the Temperature Indicators.
Enter the desired Temperature Descriptor.
Enter the desired Temperature Scale.
Select the desired Temperature Decimal
Place.
0-3 decimal places allowed.
Enter the default temperature
ENTER
ENTER
ENTER
ENTER
SETUP INDICATORS
Tot Dns
Rte Tmp Pres
RATE TIME BASE
Sec Min Hour Day
RATE DESCRIPTOR
RATE
RATE DEC PLACES(0-3)
2
RATE AVG FILTER
0
QUICK UPDATE %
1
Advance To
SETUP INDICATORS
(Temperature)
SETUP INDICATORS
Tot Dns Rte
Tmp Pres
TEMP DESCRIPTOR
TEMP
TEMPERATURE SCALE
Deg_C Deg_F
TEMP DEC PLACES(0-3)
1
TEMPERATURE DEFAULT
60 F
Advance To
SETUP INDICATORS
(Pressure)
6.3.5
SETUP
INDICATORS
(Rate)
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER