Liquid Controls Sponsler T675 - Cryogenic System Register - Manual (Page 5)

Sponsler, Inc. Model T675 Flow Totalizer Features Overview Pg. 2
2. FEATURES OVERVIEW:
2.1 INTRODUCTION
The Model T675 Delivery System is a thoroughly engineered electronic totalizing system that incorporates the latest
technology and provides the most comprehensive features available to the industry. The T675 is designed to accurately
compute and display in real time, pertinent flow parameters in both digital and graphic form. The displayed total of the
product being delivered is continually corrected for the temperature of the product. Additional accuracy can be acquired by
linearizing the turbine flowmeter input signal. The T675 math processor permits direct reading of product totals in any
desired engineering unit in both US Customary and SI i.e., gallons, liters, pounds, kilograms, scf, m3 etc.
This next generation system delivers the most sought after system enhancements while maintaining a user-friendly
simplicity of operation. The Model T675 configuration settings can be reprogrammed in the field with relative ease.
Programming the T675 is simply a matter of selecting the desired operating criteria from an all-inclusive menu thus
eliminating the need to scroll through an entire flow chart to enter or change select data. Display of various flow properties
such as temperature and flow limits, fluid density, and equivalent volume is achieved automatically with the selection of
product to be measured and turbine size.
Fault detection and identification has never been easier. In addition to standard alarm icons the T675 provides a “Detail
Display” that lists operating conditions such as supply voltage, internal battery voltage, signal input frequency, coil and
RTD resistance, product and fluid temperature to name a few. Additionally, a System Alarm Log catalogs 16 events.
The T675 Maintenance program with ICON reminders can be customized to account for the varying operating conditions
that exist between installations. This feature allows the end user to extract maximum real world service intervals without
sacrificing effective maintenance.
2.2 FEATURES
• Easy to program, operate and understand
• 3x5 backlit full graphics display
• Dual microprocessors for real-time graphics, display of totals, temperature, pressure, flowrate and alarms
• Passcode protected configuration and calibration parameters
• Temperature Compensator supports 8 individual products, LOX, LIN, LAR, CO2, CCO2, LPG, LN2O, MAPP
• Delivery total can be toggled between metered and base conditions
• 'softkeys' simplify display operation
• Selectable 2 – 10 point flowmeter linearization
• Automatic delivery system maintenance reminders based on a date and/or turbine hours of operation
• Level 3 Audit trail for all sealable meteorological parameters
• The most current Kfactor change is displayed on the operating screen with date stamp
• System alarm log simplifies fault identification
• Totalizer will withstand complete loss of power for 2 seconds, then save all operating data
• Restores to previous operating mode after power restoration
• Programmable Pump Control features protect the delivery system and increases service life
• Bluetooth, Infrared and RS-232 communication ports
• IR interface with Models SP824, SP834 Portable Printers
• Easily compatible with other printers