Liquid Controls Sponsler T675 - Cryogenic System Register - Manual (Page 24)

Sponsler, Inc. Model T675 Flow Totalizer Technical Information Pg. 21
3.3.1.4 – User passcode
Allows changing the User passcode from the factory default setting (675). The passcode can contain 1 –
16 digits. This passcode allows access to all the System settings except as indicated by Privileged or
“77468” only.
Example: 0000; <0000>
************* User Passcode ************
Current setting = 675
Enter setting (ESC to exit)?
3.3.1.5 – Maintenance
Allows setting both the system and turbine maintenance parameters, such as scheduling future maintenance
dates, establishing accumulated hours of operation between maintenance activities, and resetting both sets of
accumulated hours of operation. Depress the corresponding maintenance number in left column to access the
menu item.
************** Maintenance *************
1 – System maintenance due DDMMYY
2 – System maintenance just performed
3 – Turbines hrs until maintenance
4 – Turbine maintenance just performed
5 – Pump hrs until maintenance
6 – Pump maintenance just performed
Enter setting (ESC to exit)?
3.3.1.5.1 – System maintenance due DDMMYY
Entry specifies the maintenance date when the Maintenance icon reminder for system maintenance is
displayed.
Example: March 14, 2007; <140302>
***** System maintenance due DDMMYY ****
Current setting = 140307
Enter setting (ESC to exit)?
3.3.1.5.2 – System maintenance just performed
Functions as a maintenance record. <1> enters today’s date into the System Activity register for Last
System PM, <0> retains the last entry date.
Example: Record today’s date as the maintenance date; <1>
*** System maintenance just performed **
ARE YOU SURE, 1=yes 0=no ?