Liquid Controls WinHost Operation - Manual (Page 36)

36
Security
Position the pointer on “User Key” and press ENTER to
open a Field Edit Window.
After “User Key” has been programmed, the system can
be UNLOCKED by re-entering the “User Key” password.
Move the pointer to “Security” and press ENTER to open
a List Box Window with the options LOCKED and UN-
LOCKED. To lock the system, move select LOCKED
and press ENTER. To unlock the system, return to “User
Key” and enter the password.
“Factory Key” is for factory use only.
Enter an alpha-numeric code up to ten characters in
length and press ENTER. This password will be required
in the future to LOCK or UNLOCK the system. The sys-
tem must be UNLOCKED to gain access to secured data
entry fields.
Position the pointer on “Security” and press ENTER to
open a List Box Window shown below.
Move the pointer to the desired option and press EN-
TER to accept. When “LOCKED” is chosen, the system
will prevent the following fields from being edited:
Date Format
Date
Time
Unit ID
Pulse Out Edge
Ticket Headers
Security Field