Liquid Controls WinHost Operation - Manual (Page 16)

16
Preset and Delivery
The Preset and Delivery menu contains information the
operator might use on a daily basis for deliveries. This
program provides more flexibility in making deliveries than
the operator would have using the LectroCount register
as a stand alone, pump-and-print device.
Unit
This field indicates the current, selected unit of measure
for deliveries. This field cannot be edited from this loca-
tion. Unit can be modified from the System Calibration
or Product Calibration sub-menus of the Configure LCR
menu when the selector switch is in the calibration posi-
tion.
Price - Tax
This section is used to establish pricing information for
the product to be delivered. It contains editable fields for
Price/Unit, Tax/Unit, and Percent Tax. Click once on
the green lock indicator next to Price/Unit to open the
Field Edit Window:
Enter a value for the price per unit of measure and then
click on Write to LCR. The Field Edit Window will close
an the display field will update with the new information.
Entering a value in Price/Unit enables editing of the Price
Preset field. If no value is entered in the Price/Unit field,
the Price Preset field remains locked.
Enter values for Tax/Unit and Percent Tax in the same
way as was entered for Price/Unit. Click on the green
lock indicator to open a Field Edit Window and enter the
values desired. Tax/Unit is entered as a whole dollar
amount (e.g. a value of .34 indicates a tax of $0.34 per
unit volume). Percent Tax is entered as a percentage
value (e.g. a value of 12.49 indicates a tax percentage of
12.49%).