Liquid Controls WinHost Operation - Manual (Page 35)

35
Data Access? indicates if a data access error occurred
during a delivery which was critical to the delivery.
Delivery Code
Delivery Ticket? indicates that a delivery ticket is pend-
ing. A new delivery cannot be started until this field is
cleared by successfully printing the last delivery ticket.
Shift Ticket? indicates that a shift ticket has been re-
quested and is waiting to be printed.
Flow Active? indicates flow is active during a delivery.
The field is turned on and off with the "Delivery Active"
field but is also turned off when a delivery is paused and
turned back on when it is resumed.
Delivery Active? indicates that a delivery is active. The
field is turned on just before the "Delivery Beginning" field
is turned off and is turned off at the end of the delivery.
Gross Preset Active? indicates the current delivery is
delivering a gross preset quantity. When this quantity is
reached the delivery will either end or pause depending
on the type of preset being run.
Net Preset Active? indicates the current delivery is de-
livering a net preset quantity. When this quantity is
reached the delivery will either end or pause depending
on the type of preset being run.
Stop/Gross Preset? indicates the current delivery has
been stopped due to the gross preset value being
reached. Depending on the type of preset being run, the
delivery will either terminate or pause.
Stop/Net Preset? indicates the current delivery has been
stopped due to the net preset value being reached.
Depending on the type of preset being run, the delivery
will either terminate or pause.
VCF Active? indicates that the current product will be
temperature volume compensated during delivery.
S1 Closed? indicates the status of the S1 Solenoid. This
is NO at the beginning of a delivery and YES when sole-
noid 1 is closed due to the remaining gross or net preset
value being less than or equal to the value in the S1
Close field.
Delivery Beginning? indicates that a delivery is in the
process of being started. Once the delivery has been
started successfully, this field is turned off.
New Delivery Queued? indicates that a new delivery
has been queued in the LCR. This condition occurs when
an "Run" command is issued and the switch is in the
STOP, PRINT, or SHIFT PRINT position.
Init Warning? indicates that a 4K Flash data access er-
ror occurred during a delivery which was not critical to
the delivery but that a default was used in place of the
data that was attempting to be read.
Config Event? indicates that a configuration event has
occurred. This field is set when one or more of the fol-
lowing fields are changed while in calibration mode:
Auxiliary Multiplier
Auxiliary Unit of Measure
Base Temperature
Compensation Parameter
Compensation Type
Decimal Setting
Flow Direction
Flow Rate Time Scale
Gross Meter Totalizer
Meter ID
Net Meter Totalizer
Print Gross Volume and Compensation Parameter Flag
Print Volume Corrected Message Flag
Printer Type
Product Type
Residual Processing
S1 Close
Sale Number
Temperature Offset
Temperature Scale
Ticket Number
Ticket Required Flag
Unit of Measure
This field is cleared when a Calibration ticket is printed.
Calib Event? indicates that a calibration event has oc-
curred. This field is YES when one or more of the follow-
ing fields are changed while in calibration mode:
• Enabling or Disabling the Multi-Point Linearization
Algorithm
• Flow Rate for a Linearization Point
• Percent Error for a Linearization Point
• Pulses/Unit
This field is NO when a Calibration ticket is printed.
Diagnostics