Controlled Products Systems Group 6300-080 - Manual (Page 17)

Height determined by
installation requirements
Determined by soil
conditions and local code
22 12
• The height requirement is
determined by adjusting the
mounting plate/post assembly so
that the top of the mounting plate
is 5 inches above the top of the
gate rail (Figure 4). This will allow
you to mount the gate bracket
onto the bottom rail of the gate
and will keep the crank and
connecting arms level (see page
22, Figure 10).
• The top of the mounting plate
must be at least six (6) inches
above the ground. If it is less than
this, the gate arms will scrape the
ground when the operator starts.
Figure 3
• It is very important that the operator mounting plate is level.
10
12
Gate Hinge
Ga
te
Fra
m
e
Determined by
soil conditions
and local code.
5
Ground Level
Height determined by
installation requirements to
align arms with gate frame.
Minimum 7".
Gate Bracket
Figure 4
6300-065-E-4-08 Page 17