Burkert Type 8697 - Manual (Page 30)

30
Packaging, transport, storage
Cable gland:
→
Open the Pneumatic Control Unit: unscrewing the transparent
cap in an anticlockwise direction.
→
Unscrew the screw terminals and pull out cables.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the Pneumatic Control Unit upwards.
Pneumatic
Control Unit
Transparent cap
Fastening screws
(2x)
Pneumatic
connections
Pneumatic con-
nection to the
actuator
Actuator
Cable gland
Series 21xx Series 20xx
Fig. 27: Disassembly the Pneumatic Control Unit
13. packaging, TranspOrT,
sTOrage
note!
transport damages.
Inadequately protected equipment may be damaged during transport.
▶ During transportation protect the device against wet and dirt in
shock-resistant packaging.
▶ Avoid exceeding or dropping below the permitted storage
temperature.
incorrect storage may damage the device.
▶ Store the device in a dry and dust-free location!
▶ Storage temperature -20 – +65 °C.
damage to the environment caused by device components
contaminated with media.
▶ Dispose of the device and packaging in an environmentally friendly
manner.
▶ Observe applicable regulations on disposal and the environment.
english
Type 8697