Auto guide rail – FlexLink Configura User Manual
Page 16
Auto Guide Rail
The Auto Guide Rail component automatically places the number of guide rails required
for the conveyor system, all in one step. Guide rails already positioned can be removed
manually by clicking on the yellow triangles.
To use the automatic guide rail feature, select the component and snap it to the conveyor
system.
Note:
-
If you change system at this stage, you will have to select new guide rails. To show
this, the buttons Guide Rail and Auto Guide Rail are deactivated when you select a
different system at the top.
-
To view examples on how to build one-way and two-way conveyors, go to Example 1
and Example 2 at the end of this tutorial.
16
© Copyright Configura Sverige AB 2004. All rights reserved. Reproduction, copying or distribution to a third party is prohibited unless
consent in writing has been given by the owner.