FlexLink Configura User Manual
Page 21
Proceed as follows:
1. Move the reference point to the drawing area. Move it to the end of the main
conveyor and click when it snaps.
2. Type in the desired distance from this end point and confirm by clicking.
3. The divert/merge components (or even a complete satellite that you have built on
the side) will now snap to the reference point.
-
You can right-click on the actual pallet on the conveyor and select Settings. In the
dialog box that opens, it is possible to change settings and add various items. The
option Total Number of Pallets allows you to specify the required amount of pallets
in the system. This means that you do not have to visualize the whole amount of
pallets that you order.
21
© Copyright Configura Sverige AB 2004. All rights reserved. Reproduction, copying or distribution to a third party is prohibited unless
consent in writing has been given by the owner.