Datamax-O'Neil Labelpoint Programmer’s Manual - Manual (Page 53)

PROGRAMMER’S REFERENCE MANUAL
Printer settings
Page 49
151
4
TCP port for COM1. Valid when communication mode is set to terminal
server mode. See parameter 150.
See section ‘Communication ports’ for further information.
152
4
Communication mode for COM2. Valid values for n are {0, 1, 2} and they are
interpreted as follows:
0 = Print mode (Labelpoint, default)
1 = Terminal server mode
2 = Terminal client mode
3 = RF-ID mode
4 = Stacked printers mode (daisy chaining)
See section ‘Communication ports’ for further information.
153
4
TCP port for COM2. Valid when communication mode is set to terminal
server mode. See parameter 152.
See section ‘Communication ports’ for further information.
156 Flow control for COM1. Valid values for n are {0, 1, …, 4} and they are
interpreted as follows:
0 = both rts/cts and xon/xoff (default)
1 = rts/cts
2 = xon/xoff
3 = none
4 = disabled
157 Flow control for COM2. Valid values for n are {0, 1, …, 4} and they are
interpreted as follows:
0 = both rts/cts and xon/xoff (default)
1 = rts/cts
2 = xon/xoff
3 = none
4 = disabled
162
6
Reverse video mode for text fields. Valid values for n are {0, 1, …, 100} and
they are interpreted as follows:
0 = reverse video mode off
1 = reverse video mode on