Datamax-O'Neil Labelpoint Programmer’s Manual - Manual (Page 39)

PROGRAMMER’S REFERENCE MANUAL
Service commands
Page 35
This flag allows the host to detect when the operator has moved the paper by pressing the
print button. It is not safe to issue a reverse paper feed command when the paper is not in a
known position.
Layout outside label
This flag can be used to check if any part of the layout is outside the label. See parameter
178 and 179 for more information.
Status request 3
not used
label stock
not used
internal print button active
not used
operating parameters error
not used
not used
Operating parameters error
The printer configuration memory is corrupt. Use Service command !V3200 to reset all
parameters to their default state and then download the apropriate configuration file or use the
configuration menu to setup the printer.
Internal print button
This flag is 1 if the print button on the printer is pressed at the moment the status request is
issued.
Label stock
The printer automatically detects the type of paper installed (labels or continuous). If label
stock is loaded, this flag will be 1 .