Datamax-O'Neil Labelpoint Programmer’s Manual - Manual (Page 21)

PROGRAMMER’S REFERENCE MANUAL
Label layout definition commands
Page 17
21
22
23
24
25
26
27
USS Codabar – 2:1
USS Codabar – 3:1
USS Codabar – 5:2
USS Codabar – 8:3
USS Codabar – 13:5
USS Codabar – 11:4
USS Codabar – 7:3
Numeric code, variable length. The start and
stop characters (‘A’, ‘B’, ‘C’ or ‘D’) must be
included in the input data.
31 UPC-A Numeric code. Requires 11 digits of input
data. The printer automatically appends the
check digit.
An EAN/UPC extension field could be
automatically appended by adding 2 or 5
digits to the input data.
32 EAN 13 Numeric code. Requires 12 digits of input
data. The printer automatically appends the
check digit.
An EAN/UPC extension field could be
automatically appended by adding 2 or 5
digits to the input data.
33 EAN 8 Numeric code. Requires 7 digits of input
data. The printer automatically appends the
check digit.
34 UPC-E Numeric code. Requires 6 digits of input
data. The printer automatically appends the
check digit.
35 EAN/UPC extension Numeric code. Requires 2 or 5 digits of
input data.
This code could maunally inserted with a
EAN/UPC extension barcode field, or
automatically inserted by adding 2 or 5
digits to a EAN 13 or UPC-A barcode field.
41 Code 128 All 128 ASCII characters plus control
characters can be encoded. The control
characters are explained further in - Code
128 function codes -. Variable length.
43 EAN 128 The same as Code 128, except that the
printer automatically inserts a FNC1 as the
first character. This is unique for the EAN
128 code.
(, ) and space characters are filtered in the
barcode, but printed in the human readable
text.