Datamax-O'Neil Labelpoint Programmer’s Manual - Manual (Page 20)

PROGRAMMER’S REFERENCE MANUAL
Label layout definition commands
Page 16
Barcode symbologies
Barcode symbology Barcode type, information
1
2
3
4
5
6
7
2 of 5 Interleaved – 2:1
2 of 5 Interleaved – 3:1
2 of 5 Interleaved – 5:2
2 of 5 Interleaved – 8:3
2 of 5 Interleaved – 13:5
2 of 5 Interleaved – 11:4
2 of 5 Interleaved – 7:3
Numeric code, variable length. If a check
digit is required, it can be inserted with the
%Z command. The code must contain an
even number of digits. The printer will
therefore insert a leading 0 if necessary.
If the 2:1 ratio is used, a minimum width
expansion of 4 is required.
11
12
13
14
15
16
17
Code 39 - 2:1
Code 39 - 3:1
Code 39 - 5:2
Code 39 - 8:3
Code 39 - 13:5
Code 39 - 11:4
Code 39 - 7:3
Alphanumeric code, variable length. If a
check digit is required, it can be inserted
with the %zC command (Code39 – modulo
43 checksum) or the %Z command
(EAN/UPC – modulo 10 checksum).