beautypg.com

Chapter 4 – menu system 41 system settings – Datamax-O'Neil E-Class Mark III Operator’s Manual User Manual

Page 47

background image

Chapter 4 – Menu System

41

System Settings

The System Settings menu contains label formatting, operation, and control functions:

Menu Mode

Configuration File

Internal Module*

Default Module*

Scaleable Font Cache*

Single Byte Symbols*

Double Byte Symbols*

Time And Date

Media Counters*

Print Configuration*

Configuration Level*

Set Factory Defaults*

Format Attributes*

Label Rotation

Imaging Mode*

Pause Mode*

Peel Mode*

Security*

Units Of Measure*

Input Mode*

User Label Mode*

DPL Emulation*

Column Emulation*

Row Emulation*

SOP Emulation*

Back After Print*

Font Emulation*

Label Store*

Menu Language

Display Settings*

Fault Handling*

Buzzer*

SCL Font Bold Factor*

Items denoted with an asterisk (*) are only accessible through the Advanced Menu.

The menu selections are defined as follows:

DISPLAYED ITEM

ITEM DESCRIPTION

MENU MODE

Sets the menu access level, where:

USER MENU

Accesses limited basic menu items.

ADVANCED MENU

Accesses all menu items.

CONFIGURATION FILE

Controls the creation, storage, and recall of printer configuration files, where:

RESTORE AS

CURRENT

Returns the printer to a previously saved configuration.

SAVE SETTING AS

Creates a file based on the current printer configuration, as described here.

DELETE FILE

Removes a selected configuration file from memory. (An active file cannot be deleted.)

FACTORY SETTING

FILE

Provides a list of available configuration files used to restore the printer's configuration following a

Level One Reset or when YES is selected in the SET FACTORY DEFAULTS menu. (NONE is the default

file setting.)

INTERNAL MODULE

Sets the number of 1KB blocks (100 - 5120) allocated for the internal DRAM ‘D’ module, where:

1024

Is the Default Setting.

DEFAULT MODULE

Designates the memory module to be used for file storage when not specified, where:

D

Is the Default Setting (DRAM module).

G

Flash module.

The available modules may vary depending upon printer model and options.