ClimaCool UGW Manual - Manual (Page 38)

www.climacoolcorp.com
36
Control Access Display Table
Page 9 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
/C1SucPr: (ps) Module 1 Comp 1 Suction
Pressure m1_c1_suc_pres_stat_5
40.6 FALSE
C1DisTmpCal: (F) M1C1 DIS Temp Calib. Point m1c1_disch_temp_cp_5 0.0 -250 250 TRUE
/C1DisTp: (F) Module 1 Comp 1 Disch Temp m1_c1_disch_temp_stat_5 110.3 FALSE
C1SucTempCal: (F) M1C1 SUC Temp Calib. Point m1c1_suc_tmp_cp_5 0.0 -250 250 TRUE
/C1SucTp: (F) Module 1 Comp 1 Suction Temp m1_c1_suct_temp_stat_5
53.6 FALSE
C1CompAmpCal: M1C1 Amps Calib. Point m1c1_amps_cp_5 3.0 -250 250 TRUE
/C1 Amps: Module 1 Comp 1 Amps m1c1_amps_stat_5 33.6 FALSE
LINK(S): PREV, SYSTEM SETUP, HOME
LOCK WATER TEMPS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Lock Main Header Water & Air Temps
Evap Wat In Lock :
Lock CHWR Temp lock_chwr_1 No Off, On TRUE
Evap Wat In Lock Value : (F) CHWR Lock Value chwr_lock_val_1 54.0 0 165 TRUE
Evap Wat Out Lock: Lock EVAP LVG TMP lock_chws_1 No Off, On TRUE
Evap Wat Out Lock Value: (F) EVAP LVG TMP Lock Value chws_lock_val_1 43.0 0 165 TRUE
Cond Wat In Lock : Lock CWS Temp lock_cws_1 No Off, On TRUE
Cond Wat In Lock Value : (F) CWS Lock Value cws_lock_val_1 85.0 0 165 TRUE
Cond Wat Out Lock: Lock CWR Temp lock_cwr_1 No Off, On TRUE
Cond Wat Out Lock Value: (F) CWR Lock Value cwr_lock_val_1 58.0 0 165 TRUE
Outdoor Air Lock: Lock CHWS Temp lock_oat_1 Yes Off, On TRUE
Outdoor Air Lock Value: (F) OAT Lock Value oat_lock_val_1 61.0 -20 140 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
SCREW PID SEQUENCING DATA
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic PID Sequencing Data
VFD Minimum VDC Input: 4.3
VFD Minimum VDC Input vfd_min_vdc_1 4.4 0 10 TRUE
VFD Minimum VDC In 3 Scr: 6.16 VFD Minimum for Three Screws vfd_min_vdc_three_scr_1 6.16 0 10 TRUE
VFD Minimum VDC In 4 Scr: 7.17 VFD Minimum for Four Screws vfd_min_vdc_four_scr_1 7.17 0 10 TRUE
VFD Maximum VDC Input: 10.00 VFD Maximum VDC Input vfd_max_vdc_1 10.0 0 10 TRUE
VFD Start PID for One Scr: 33 VFD Start PID for One Screw vfd_start_pid_one_scr_1 33.0 0 500 TRUE
VFD Min PID for One Scr: 34 VFD Minimum PID for One
Screw vfd_min_pid_one_scr_1
34.0 0 500 TRUE
VFD Max PID for One Scr: 75 VFD Maximum PID for One
Screw vfd_max_pid_one_scr_1
75.0 0 500 TRUE
VFD Max One PID Min Two Scr: 85 VFD Max One PID Min Two
Screws vfd_max_one_pid_min_two_scr_1
85.0 0 500 TRUE
VFD Min PID for Two Scr: 86 VFD Minimum PID for Two
Screws vfd_min_pid_two_scr_1
86.0 0 500 TRUE
VFD Interim PID Two Scr: 123 VFDInterim PID for One Full One
Min Screws vfd_interim_pid_two_scr_1
123.0 0 500 TRUE
VFD Max PID for Two Scr: 160 VFD Maximum PID for Two
Screws vfd_max_pid_two_scr_1
160.0 0 500 TRUE
VFD Max Two PIDMinThree Scr:170 VFD Max Two PID Min Three
Screws vfd_max_two_pid_min_three_scr_1
170.0 0 500 TRUE
VFD Min PID for Three Scr: 171 VFD Minimum PID for Three
Screws vfd_min_pid_three_scr_1
171.0 0 500 TRUE
VFD IntPID One Full;Two Min:195 VFDInterim PID for One Full &
Two Min Screws vfd_interim_pid_one_full_two_min_s
cr_1
195.0 0 500 TRUE
VFD IntPID Two Full;One Min:220 VFD Interim PID for Two Full &
One Min Screws vfd_interim_pid_two_full_one_min_s
cr_1
220.0 0 500 TRUE
VFD Max PID for Three Scr: 245 VFD Maximum PID for Three
Screws vfd_max_pid_three_scr_1
245.0 0 500 TRUE
VFD Max 3 PID Min Four Scr: 255 VFD Max Three PID Min Four
Screws vfd_max_three_pid_min_four_scr_1
255.0 0 500 TRUE
VFD Min PID for Four Scr: 256 VFD Minimum PID for Four
Screws vfd_min_pid_four_scr_1
256.0 0 500 TRUE
VFD IntPID One Full;3 Min: 274 VFDInterim PID for One Full &
Three Min Screws vfd_interim_pid_one_full_three_min
_scr_1
274.0 0 500 TRUE
VFD IntPID Two Full;Two Min:292 VFD Interim PID for Two Half &
One Min Screws vfd_interim_pid_two_full_two_min_s
cr_1
292.0 0 500 TRUE
VFD IntPID 3 Full; One Min: 311 VFD Interim PID for Three Full
One Min Screws vfd_interim_pid_three_full_one_min
_scr_1
311.0 0 500 TRUE
VFD Max PID for Four Scr: 330 VFD Maximum PID for Four
Screws vfd_max_pid_four_scr_1
330.0 0 500 TRUE
VFD Last PID: 340 VFD Last PID vfd_last_pid_1 340.0 0 500 TRUE
Screw Runtime Before Flush 8.0h Screw Runtime in Minutes scr_runtime_before_flush_1 4.0 0 999 TRUE
Use Screw Flush Cycle Use Screw Flush Cycle use_scr_flush_1 Yes No, Yes TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
Page 10 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
MASTER MICRO FACTORY
SETUP FN8
Screen Display Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Master Ctrlr Fact Setup FN8
FN5
LINK(S): MODULE SIZE SELECTOR,PID COOL STG1 SETUP,PID HEAT STG1 SETUP,FIXED OPEN MODULE MENU,MOTORIZED VALVE OPTION,MOT VLV SIGNAL TO CLOSE MENU,
MASTER INPUT CHNLS 6, &10 SETUP,MASTER INPUT CHNL 7 DEM LIMIT SETUP,MASTER INPUT 8 & 11 SETUP,WATER MAINS & AIR TEMP LIMITS,STARTUP & STAGE DELAYS,
ALL MODULE COMP UNLOAD STATUS,AUTO HEAT TRG RESET ON OAT,COMPR SEQUENCING METHOD,HEAT BIN LOAD CAP% STATUS,COOL BIN LOAD CAP% STATUS,
MAIN TXV PID SETTINGS,MAIN TXV PSI PID SETTINGS,M1 & M2 MAIN TXV SETTINGS,M3 & M4 MAIN TXV SETTINGS,MODULE ALARM CONDITION RETRIES,
MODULE NUMBER MENU,KEYPAD,PREV, SYSTEM SETUP, HOME, ALARM
MODULE SIZE SELECTOR
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Module Size Selector Screen Legend
Mod1 Size:
/ 1= Not Used/4=80Ton Mod
Module 1 Size mod1_size_1 65 Ton 1 4 TRUE
Mod2 Size:
/NOTE:DO NOT SELECT 2 OR 3
Module 2 Size mod2_size_1 65 Ton 1 4 TRUE
Mod3 Size: Module 3 Size mod3_size_1 65 Ton 1 4 TRUE
Mod4 Size: Module 4 Size mod4_size_1 65 Ton 1 4 TRUE
Mod5 Size: Module 5 Size mod5_size_1 Not Used 1 4 TRUE
Mod6 Size: Module 6 Size mod6_size_1 Not Used 1 4 TRUE
LINK(S): PREV, ALARM, SYSTEM SETUP, CLOCKSET
PID COOL STG1 SETUP
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Cool PID Stage #1 Setup
Stage One Cool PID Output : (%)
Stage 1 Cooling PID stg1_clg_pid_1 106.719604 FALSE
Stage One Cool PID Interval: Clg PID Interval clg_interval_1 8.0 sec 1 100 TRUE
Stage One Cool PID P-Gain : Clg PID P-gain clg_p_gain_1 18.0 0 999 TRUE
Stage One Cool PID I-Gain#1: Clg PID I-gain clg_i_gain_1 0.35 0 99 TRUE
Max Cool Ramp Rate: - (F) (/min) MAX COOL RAMP RATE max_cool_ramp_rate_1 10.0 °F/min 1 20 TRUE
Clg PID Rise Fast: (%/min) Clg PID Rise Fast clg_rise_fast_1 12.0 sec 1 300 TRUE
Clg PID Rise Slow: (%/min) Clg PID Rise Slow clg_rise_slow_1 5.0 sec 1 300 TRUE
Clg PID Fall: (%/min) Clg PID Fall clg_fall_1 22.0 2 300 TRUE
Cool Deadbd1: Clg PID DB1 clg_db1_1 0.3 0 99 TRUE
/CoolDeadbd2: Clg PID DB2 clg_db2_1 0.0 0 99 TRUE
Stage One Cool PID I-Gain#2: Clg PID IG2 clg_ig2_1 0.01 0 99 TRUE
PID Switching Differential: (%) PID Differential Factor pid_diff_fact_1 5.0 -100 100 TRUE
Cool Cntrl Setpt Offset: (F) Cool Control Setpoint Offset cl_cntrl_spt_offset_1 0.0 -250 250 TRUE
LINK(S): PREV, ALARM, SYSTEM SETUP, CLOCKSET
PID HEAT STG1 SETUP
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Heat PID Stage #1 Setup
Stage One Heat PID Output : (%)
Stage 1 Heating PID stg1_htg_pid_1 0.0 FALSE
Stage One Heat PID Interval: Htg PID Interval htg_interval_1 2.0 sec 1 100 TRUE
Stage One Heat PID P-Gain : Htg PID P-gain htg_p_gain_1 20.0 0 999 TRUE
Stage One Heat PID I-Gain#1: Htg PID I-gain htg_i_gain_1 0.25 0 99 TRUE
Max Heat Ramp Rate: (F) (/min) MAX HEAT RAMP RATE max_heat_ramp_rate_1 10.0 °F/min 1 99 TRUE
Htg PID Rise Fast: (%/min) Htg PID Rise Fast htg_rise_fast_1 12.0 sec 1 300 TRUE
Htg PID Rise Slow: (%/min) Htg PID Rise Slow htg_rise_slow_1 4.0 sec 1 300 TRUE
Htg PID Fall: (%/min) Htg PID Fall htg_fall_1 25.0 2 300 TRUE
HeatDeadbd1: Htg PID DB1 htg_db1_1 0.1 0 99 TRUE
/Heat Deadbd2: Htg PID DB2 htg_db2_1 0.0 0 99 TRUE
Stage One Heat PID I-Gain#2: Htg PID IG2 htg_ig2_1 0.0 0 99 TRUE
PID Switching Differential: (%) PID Differential Factor pid_diff_fact_1 5.0 -100 100 TRUE
Heat Cntrl Setpt Offset: (F) Heat Control Setpoint Offset ht_cntrl_spt_offset_1 1.0 -250 250 TRUE
LINK(S): PREV, ALARM, SYSTEM SETUP, CLOCKSET
FIXED OPEN MODULE MENU
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
FIX Mod Mot Vlv Open for Header Bypass
Open Ext Bypass if NO Comps ON?
Open Bypass Valves by NO
Comps ON open_byp_vlv_on_no_cmps_1
Off No, Yes TRUE
Delay Before Closing Mot Valves: Delay Before Closing Mot Vlv close_vlv_delay_5 25.0 1 999 TRUE
Fix Module #1 as Open Module?: Fix Mod1 as Open fix_module1_open_1 Yes No, Yes TRUE
Never Close Module #1?: Never Close Module #1 never_close_mod1_1 No No, Yes TRUE
Fix Module #2 as Open Module?: Fix Mod2 as Open fix_module2_open_1 No No, Yes TRUE
Never Close Module #2?: Never Close Module #2 never_close_mod2_1 No No, Yes TRUE
Fix Module #3 as Open Module?: Fix Mod3 as Open fix_module3_open_1 No No, Yes TRUE
Never Close Module #3?: Never Close Module #3 never_close_mod3_1 No No, Yes TRUE
Fix Module #4 as Open Module?: Fix Mod4 as Open fix_module4_open_1 No No, Yes TRUE
Never Close Module #4?: Never Close Module #4 never_close_mod4_1 No No, Yes TRUE
Page 9 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
/C1SucPr: (ps) Module 1 Comp 1 Suction
Pressure m1_c1_suc_pres_stat_5
40.6 FALSE
C1DisTmpCal: (F) M1C1 DIS Temp Calib. Point m1c1_disch_temp_cp_5 0.0 -250 250 TRUE
/C1DisTp: (F) Module 1 Comp 1 Disch Temp m1_c1_disch_temp_stat_5 110.3 FALSE
C1SucTempCal: (F) M1C1 SUC Temp Calib. Point m1c1_suc_tmp_cp_5 0.0 -250 250 TRUE
/C1SucTp: (F) Module 1 Comp 1 Suction Temp m1_c1_suct_temp_stat_5
53.6 FALSE
C1CompAmpCal: M1C1 Amps Calib. Point m1c1_amps_cp_5 3.0 -250 250 TRUE
/C1 Amps: Module 1 Comp 1 Amps m1c1_amps_stat_5 33.6 FALSE
LINK(S): PREV, SYSTEM SETUP, HOME
LOCK WATER TEMPS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Lock Main Header Water & Air Temps
Evap Wat In Lock :
Lock CHWR Temp lock_chwr_1 No Off, On TRUE
Evap Wat In Lock Value : (F) CHWR Lock Value chwr_lock_val_1 54.0 0 165 TRUE
Evap Wat Out Lock: Lock EVAP LVG TMP lock_chws_1 No Off, On TRUE
Evap Wat Out Lock Value: (F) EVAP LVG TMP Lock Value chws_lock_val_1 43.0 0 165 TRUE
Cond Wat In Lock : Lock CWS Temp lock_cws_1 No Off, On TRUE
Cond Wat In Lock Value : (F) CWS Lock Value cws_lock_val_1 85.0 0 165 TRUE
Cond Wat Out Lock: Lock CWR Temp lock_cwr_1 No Off, On TRUE
Cond Wat Out Lock Value: (F) CWR Lock Value cwr_lock_val_1 58.0 0 165 TRUE
Outdoor Air Lock: Lock CHWS Temp lock_oat_1 Yes Off, On TRUE
Outdoor Air Lock Value: (F) OAT Lock Value oat_lock_val_1 61.0 -20 140 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
SCREW PID SEQUENCING DATA
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic PID Sequencing Data
VFD Minimum VDC Input: 4.3
VFD Minimum VDC Input vfd_min_vdc_1 4.4 0 10 TRUE
VFD Minimum VDC In 3 Scr: 6.16 VFD Minimum for Three Screws vfd_min_vdc_three_scr_1 6.16 0 10 TRUE
VFD Minimum VDC In 4 Scr: 7.17 VFD Minimum for Four Screws vfd_min_vdc_four_scr_1 7.17 0 10 TRUE
VFD Maximum VDC Input: 10.00 VFD Maximum VDC Input vfd_max_vdc_1 10.0 0 10 TRUE
VFD Start PID for One Scr: 33 VFD Start PID for One Screw vfd_start_pid_one_scr_1 33.0 0 500 TRUE
VFD Min PID for One Scr: 34 VFD Minimum PID for One
Screw vfd_min_pid_one_scr_1
34.0 0 500 TRUE
VFD Max PID for One Scr: 75 VFD Maximum PID for One
Screw vfd_max_pid_one_scr_1
75.0 0 500 TRUE
VFD Max One PID Min Two Scr: 85 VFD Max One PID Min Two
Screws vfd_max_one_pid_min_two_scr_1
85.0 0 500 TRUE
VFD Min PID for Two Scr: 86 VFD Minimum PID for Two
Screws vfd_min_pid_two_scr_1
86.0 0 500 TRUE
VFD Interim PID Two Scr: 123 VFDInterim PID for One Full One
Min Screws vfd_interim_pid_two_scr_1
123.0 0 500 TRUE
VFD Max PID for Two Scr: 160 VFD Maximum PID for Two
Screws vfd_max_pid_two_scr_1
160.0 0 500 TRUE
VFD Max Two PIDMinThree Scr:170 VFD Max Two PID Min Three
Screws vfd_max_two_pid_min_three_scr_1
170.0 0 500 TRUE
VFD Min PID for Three Scr: 171 VFD Minimum PID for Three
Screws vfd_min_pid_three_scr_1
171.0 0 500 TRUE
VFD IntPID One Full;Two Min:195 VFDInterim PID for One Full &
Two Min Screws vfd_interim_pid_one_full_two_min_s
cr_1
195.0 0 500 TRUE
VFD IntPID Two Full;One Min:220 VFD Interim PID for Two Full &
One Min Screws vfd_interim_pid_two_full_one_min_s
cr_1
220.0 0 500 TRUE
VFD Max PID for Three Scr: 245 VFD Maximum PID for Three
Screws vfd_max_pid_three_scr_1
245.0 0 500 TRUE
VFD Max 3 PID Min Four Scr: 255 VFD Max Three PID Min Four
Screws vfd_max_three_pid_min_four_scr_1
255.0 0 500 TRUE
VFD Min PID for Four Scr: 256 VFD Minimum PID for Four
Screws vfd_min_pid_four_scr_1
256.0 0 500 TRUE
VFD IntPID One Full;3 Min: 274 VFDInterim PID for One Full &
Three Min Screws vfd_interim_pid_one_full_three_min
_scr_1
274.0 0 500 TRUE
VFD IntPID Two Full;Two Min:292 VFD Interim PID for Two Half &
One Min Screws vfd_interim_pid_two_full_two_min_s
cr_1
292.0 0 500 TRUE
VFD IntPID 3 Full; One Min: 311 VFD Interim PID for Three Full
One Min Screws vfd_interim_pid_three_full_one_min
_scr_1
311.0 0 500 TRUE
VFD Max PID for Four Scr: 330 VFD Maximum PID for Four
Screws vfd_max_pid_four_scr_1
330.0 0 500 TRUE
VFD Last PID: 340 VFD Last PID vfd_last_pid_1 340.0 0 500 TRUE
Screw Runtime Before Flush 8.0h Screw Runtime in Minutes scr_runtime_before_flush_1 4.0 0 999 TRUE
Use Screw Flush Cycle Use Screw Flush Cycle use_scr_flush_1 Yes No, Yes TRUE
LINK(S): PREV, SYSTEM SETUP, HOME