Climax FF8200 FLANGE FACER - Manual (Page 7)

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 7
OperatiOnal DimensiOns
Dimensions in Inch (mm)
ID Chuck Assembly
Max Rotating Height:
Single point machining:
Ø15.51 ± 0.25 (394.0 ± 6.4)
Milling:
Ø21.84 ± 0.25 (554.7 ± 6.4)
Dim A
Dim A (all ± 0.25 (6.4):
Max. clearance with tool head fully retracted
Turning arm, single point mach only: 1.76 (44.7)
Milling & turning arm 1.74 (44.2)
(either milling or single point machining)
Milling & turning arm, grinding:
1.64 (41.7)
12.13 ± 0.25 (308.1 ± 6.4)
minimum bore depth
NOTE: ± 0.25 (± 6.4) is travel of leveling foot
Chucking and Machining Diameters:
Max: Ø120.0 (3048.0)
Min: Ø45.0 (1143.0)
Swing diameter,
single-point machining
Max: Ø127.7 (3243.6)Min:
Ø84.7 (2151.4)
Swing diamter, milling:
Max: Ø120 (3048.0) Min:
Ш82.8 (2103.1)