Climax KM4000 KEY MILL - Manual

KM4000 KeyMill
Designed to cut extra-wide keyways, stress relief
pockets, motor mounts slots, and more.
A compact, rugged, portable milling
machine, the fully CE-Compliant KM4000
Portable Key Mill is designed to cut extra-
wide keyways, stress relief pockets, motor
mount slots, and more.
High quality, heavy-duty machine
• Cuts new keyways up to 3.25 inches
(82.6 mm) wide and 7.88 inches (200.2
mm) long in one setup.
• Two-inch (50.8 mm) lateral travel allows
cutting wide pockets or slots with a single
end mill.
• Universal type motor and triple gear
reduction provide plenty of torque.
• Permanently sealed lubrication, so
machine can be operated at any angle.
• The leadscrew is a precision Acme thread
and is fitted with roller thrust bearings.
• Anti-friction bearings used throughout.
• Dovetail ways machined for smooth
movement in both longitudinal and
transversal directions.
• Features zeroing-type adjusting dial for
controlling cutter depth.
• Contoured base is self-centering and self-
aligning on the shaft.
• Electronic speed control offers precision
control of spindle speeds while retaining
full torque over available rpm range.
Compact, easy to set up, versatile
• Needs only 8.5 inches (215.9 mm) of
shaft for clamping, or only 10.5 inches
(266.7 mm) of shaft for clamping from an
obstruction.
• Mounts on shafts from 4 - 24 inches
(101.6 - 609.6 mm) in diameter.
• Mounts anywhere along the shaft.
• Rapid longitudinal travel can be made
with a drill motor for quick setups.
2013
KM4
10
Technical Data
• 0.75 inches (19.05 mm) is the standard
spindle size for inch-machines
• 20 mm (0.79 inches) is the standard
spindle size for metric machines.
• Many different machine variations are
possible, contact your Climax Sales
Representative for more information.