Climax PM4200 MILLING MACHINE - Manual

pm4200 milling machine
Variable bed lengths and milling head
options offer enhanced versatility.
Quality Machine Design with Power-Packed
Performance
• Precision machined dovetail ways and
adjustable gibs provide smooth accurate
travel.
• All gears and drives are permanently
lubricated and sealed to allow operation
in any position.
Powerful
• Hydraulic, pneumatic, and electric motors
are available to provide power for milling
spindle.
• Feed options include manual, electric,
and pneumatic.
• Optional HSK spindle.
Versatile
• Two different milling head options are
available; the 3 ⁄
4
-inch Weldon shank
spindle, and the flexible HSK 40A spindle.
• 120V and 230V electric feed options are
available in addition to manual feed for
fine adjustment.
• The electric feed option provides infinitely
variable rates from 0 to 20 IPM, with
push-button rapid traverse.
• Forward, neutral and reverse modes are
controlled by a simple shift lever.
Rigid and Durable
• Compact yet rigid design for hard to
reach and limited clearance applications.
Flexible
• Cross slide allows mounting of milling
spindle on either side of the bed.
• An extended ram may be used in
conjunction with the more powerful and
versatile HSK spindle.
• The optional HSK milling head swivel
plate accessory allows 360° range of
spindle angles
• Optional sub-plates are available for extra
bed rigidity and installation versatility.
Quick and Easy Setup
• The PM4200 3-axis portable milling
machine provides precise and versatile
on the job milling capabilities. It is
designed to be attached either to the
work piece or to a support structure
beside it.
• Beds are available in 20, 49 and 78 inch
(508, 1244.6 and 1981.2 mm) travel.
2013
PM42
9
Applications Include:
• The PM4200 is commonly used for milling
large cumbersome parts.
• Many customers use the PM4200
machines when welding up and
re-machining worn parts on production
machinery like stamping presses.
• Long motor mount slots are easily
machined, often without dismantling since
the mill can be mounted right on the
workpiece.
• Motor mounts and pump bases are easily
machined, especially in tight locations.