Pm technical information – Climax PM3000 OBS Three Axis Mills User Manual
Page 5

10/98 5
Specifications (Inches/mm)
Specifications subject to change without notice.
For precision dimensions consult your factory representative.
Overall length
(w/o feed
assembly):
Overall width
Minimum:
Maximum (top slide
extended):
Overall height
(std mach)
Minimum:
Maximum:
Overall height
(B-series):
Height from mounting
surface to spindle nose
Minimum:
Maximum:
Milling area
(single setup):
Longitudinal travel:
Cross slide travel:
Vertical travel:
Spindle size:
No-load spindle speed
(electric motor):
(air motor*):
(hydraulic motor**):
Blank tool slide length:
Blank tool slide travel:
Working weight
Machine only:
PM2000/PM2000-B
36.85 (935.99)
13.22 (335.79)
20.22 (513.59)
13.6 (345.4)
16.6 (421.6)
11.3 (287.0)
0.6 (15.2)
3.6 (91.4)
8.0 x 20.0 (203.2 x 508.0)
20.0 (508.0)
8.0 (203.2)
3.0 (76.2)
.75" (20)
280-525 rpm
Up to 900 rpm
Up to 274 rpm
11.0 (279.4)
6.4 (162.5)
332 lb (151 kg)
PM3000/PM3000-B
64.85 (1672.99)
13.22 (335.79)
20.22 (513.59)
13.6 (345.4)
16.6 (421.6)
11.3 (287.0)
0.6 (15.2)
3.6 (91.4)
8.0 x 49.0 (203.2 x 1244.6)
49.0 (1244.6)
8.0 (203.2)
3.0 (76.2)
.75" (20)
280-525 rpm
Up to 900 rpm
Up to 274 rpm
11.0 (279.4)
6.4 (162.5)
544 lb (248 kg)
PM4000/PM4000-B
94.85 (2409.19)*
13.22 (335.79)
20.22 (513.59)
13.6 (345.4)
16.6 (421.6)
11.3 (287.0)
0.6 (15.2)
3.6 (91.4)
8.0 x 78.0 (203.2 x 1981.2)
78.0 (1981.2)
8.0 (203.2)
3.0 (76.2)
.75" (20)
280-525 rpm
Up to 900 rpm
Up to 274 rpm
11.0 (279.4)
6.4 (162.5)
710 lb (323 kg)
** Configurations including special bed lengths and hydraulic milling heads available upon special request.
PM Technical Information
* Air motor requires 105 cubic feet per minute (3m
3
/min) at 80 psi (550 kPa).
MACHINE SPECIFICATIONS: