Applications, A wide variety of applications, Model pm2000 – Climax PM3000 OBS Three Axis Mills User Manual
Page 3
10/98 3
Applications
Vertical adjusting screw with
zeroing type dial in .001
increments
Removable hand crank
Manual feed (cross slide)
Standard 3/4" Weldon type spindle
A PM3000 milling a turbine
diaphragm at Philadelphia
Electric.
Using a PM2000 with a fly
cutter to mill the flange on
a large pump on-site.
A PM2000 with pneumatic motor, shown here with fly
cutters, was used to reface 20 foot bus bars in an aluminum
plant.
Power feed
Manual feed
(x-axis)
Adjustable
feed stop
Stud for external power feed
source (cross slide)
Triple gear reduction
Precision machined
dovetail ways
Adjustable quill clamp
A Wide Variety
of Applications
The Climax PM Series are especially
useful for milling large cumbersome
parts. Anyone familiar with basic
machining practices will find these
portable mills simple to operate. Many
customers use the PM Series ma-
chines when welding up and re-
machining worn parts on production
machinery such as stamping presses.
Long motor mount slots are easily
machined, often without dismantling
since the mill can be mounted right on
the part. Aluminum smelter plants have
used a PM2000 with a fly
cutter to quickly face off the
pitted surface of 20-foot
beams used as bus bars.
Model PM2000