Climax LM6000 OBS LINEAR/GANTRY MILL - Manual (Page 2)

Specifications
Travel/Standard Travel/Metric
Main bed travel lengths (X-axis) 48.0 inches 1219.2 mm
72.0 inches 1828.8 mm
96.0 inches 2438.4 mm
120.0 inches 3048.0 mm
144.0 inches 3657.6 mm
RAM assembly (Y-axis) travel, inverted or overhead machining (Riser required)
Ram length 36 inch (609.6 mm) 24.0 inches 609.6 mm
Ram length 48 inch (914.4 mm) 36.0 inches 914.4 mm
Ram length 60 inch (1219.2 mm) 48.0 inches 1219.2 mm
RAM assembly (Y-axis) travel, standard setup (Measurements are from center of spindle to edge of bed)
Ram length 36 inch (609.6 mm) 14.5 inches 368.3 mm
Ram length 48 inch (914.4 mm) 26.5 inches 673.1 mm
Ram length 60 inch (1219.2 mm) 26.5 inches 673.1 mm
NOTE: Max. recommended Y-axis travel with 60 inch (1219.2 mm) ram partially offset. When the ram is
centered, the travel is 16.25 inches (412.75 mm) each side.
Spindle assembly (Z-axis)
Travel 4.0 or 8.0 inches 101.6 or 203.2 mm
Power options Hydraulic or Pneumatic
Hydraulic Power Units 25 Hp 18.6 kW
Maximum cutter diameter 8.0 inches 203.2 mm
Tool attachment (spindle taper) #40 or #50 taper NMTB
Power feed assemblies
Heavy duty electric feed available for X, Y, Z-axis.
X & Y axis power feed utilize self-cleaning ball screw for long service life.
Manual hand wheels are provided for any axis without a power feed (Z-axis feed uses ACME leadscrew).
Feed Rate 1.0 - 20.0 inches/min. 25.4 - 508.0 mm/minute
Rapid advance (horizontal or vertical) 20.0 inches/min. 508.0 mm/minute
Machine control center
Single pendant control panel (integrated with the Climax Hydraulic Power Unit) provides power control to all three
axes and spindle. Includes instant rapid advance button. Optional control panel available to control 3-axis feed
only, for use with customer-supplied Hydraulic Power Unit.
Specifications Specifications
Climax Portable Machine Tools, Inc. 2712 E. Second Street, Newberg, OR 97132 USA Web site: www.cpmt.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
All dimensions should be considered
reference. Contact your Climax
Representative for precision dimen-
sions.
Specifications are subject to change
without notice.
There are no systems or components
on this machine that are capable of
producing hazardous emC, uV or other
radiation hazards.
The machine does not use lasers nor
does it create hazardous materials such
as gasses or dust.