MoTeC Display Creator - Manual (Page 61)

Importing a DBC file 61
www.motec.com Display Creator User Manual – MoTeC Ⓒ 2014 Published 1 July 2014
1. An initial import is done.
2. Changes are made to the Dash Manager configuration that results in a modified DMC file.
3. From the Communications tab in Display Creator, the DBC file and Update button are selected.
4. The Import a DBC File window displays showing the differences between the Dash Manager and Display
Creator configurations.
5. Selections are made and the DBC file is imported.
☛ The Display Creator DBC file is totally replaced with the selections made. That is, if a signal that was
previously included is not selected, it will not be included in the new Display Creator configuration.