MoTeC Display Creator - Manual (Page 45)

Page Elements 45
www.motec.com Display Creator User Manual – MoTeC Ⓒ 2014 Published 1 July 2014
☛ The Configure Ticks window displays the current configuration, but not any non-linear adjustments. It will
always adjust the configuration to a linear progression based on the values and configuration selected.
Dial Face
Sets the start and end of the dial relative to the zero angle
position.
Major Divisions
Set the number of major divisions (does not include the initial
position) and the start and end values. Ten would give 11
positions including the start.
Tick Text
The ticks can be same as the value or different.
Minor Divisions
Set whether minor divisions are required and the number of
divisions between each major division.