B&K Precision 4078 - Manual - Manual (Page 76)

4.13.4.10 Start Address
:ARBitrary:STARt
This command sets the start address of the waveform to be run.
Arguments
Type:
Numeric
Range: 1 to 399,999
Rounding: to integer value
Command Type: Setting or Query
Setting
Syntax:
:ARBitrary:STARt
:ARBitrary:STARtMINimum|MAXimum
Example: :ARB:STAR 100
Query
Syntax:
:ARBitrary:STARt?[MINimum|MAXimum]
Examples: :ARB:START?
:ARB:STAR? MIN
Response: NR1
Considerations: The start address and length must meet the condition:
Start Address + Length - 1
≤ 400,000
4.13.4.11 Wavelength
:ARBitrary:LENGth
This command sets the length of the waveform being run.
Arguments
Type:
Numeric
Range: 2 to 400,000
Rounding: to integer value
Command Type: Setting or Query
Setting
Syntax:
:ARBitrary:LENGth
:ARBitrary:LENGthMINimum|MAXimum
Example: :ARB:LENG 1E3
Query
Syntax:
:ARBitrary:LENGth?[MINimum|MAXimum]
Example: :ARB:LENG?
Response: NR1
Considerations: 1) Changing the wavelength will change either the frequency.
2) The minimum wavelength is 2.
4.13.4.12 Marker Address
:ARBitrary:MARKer [:ADDRess]
This command is used to set the address of the marker.
Arguments
Type:
Numeric.
Range: 1 to 400,000
Rounding: to integer values