B&K Precision 4078 - Manual - Manual (Page 70)

Arguments
Type:
Numeric
Range: 1 to 999999
Rounding: to integer value
Command Type: Setting or Query
Setting
Syntax
:TRIGger:BURSt
Examples :TRIG:BURS 100
:TRIG:BURS MAXIMUM
Query
Syntax:
:TRIGger:BURSt?[MAXimum|MINimum]
Response: NR1
Examples: :TRIG:BURST?
:TRIG:BURS? MAX
4.13.3.4 Internal Trigger Rate
:TRIGger:TIMer
Sets the rate of the internal trigger.
Arguments
Type:
Numeric
Units: S, mS, uS, nS
Range: 1E-6S to 100S
Rounding: to 4 digits
Command Type: Setting or Query
Setting
Syntax:
:TRIGger:TIMer[units]
:TRIGger:TIMerMINimum|MAXimum
Examples: :TRIG:TIM 10E-6
:TRIG:TIM MIN
Query
Syntax:
:TRIGger:TIMer?[MINimum|MAXimum]
Response: NR3
Examples: :TRIG:TIM?
:TRIG:TIM? MIN
4.13.4 Arbitrary Subsystem
The Arbitrary subsystem is not part of the SCPI standard. It was developed to suit the needs of the instrument.
Within this subsystem are commands to:
1) control the point rate, start address, wavelength, marker address, and synchronization pulse address;
2) set values of the arbitrary waveform, either discretely or using predefined, copy or draw functions;
3) protect an area of waveform memory;
4) set the state of the automatic update and increment features;
5) update the waveform.
The following shows the structure of the ARBitrary subsystem:
:ARBitrary
:PRATe