Atec Anritsu-MS4640B - Manual (Page 50)

50 PN: 11410-00611 Rev. A MS4640B Series TDS
Ordering Information VectorStar™ MS4640B Series
Test Port Cables, Flexible, Ruggedized-Style Female Connectors, Phase Stable
Ruggedized style female connectors for VNA test ports.
3671KFS50-60 K (female) to 3.5 mm (male), 2 each 63.5 cm (25 in)
3671KFK50-60 K (female) to K (male), 2 each, 63.5 cm (25 in)
3671KFK50-100 K (female) to K (male), 1 each, 96.5 cm (38 in)
3671KFKF50-60 and 3671KFK50-60 K (female) to K (male), 1 each, 63.5 cm (25 in)
K (female) to K (female), 1 each 63.5 cm (25 in)
3671VFV50-60 V (female) to V (male), 2 each, 63.5 cm (25 in), rated to 67 GHz
3671VFV50-100 V (female) to V (male), 1 each 96.5 cm (38 in), rated to 67 GHz
Test Port Converters To change or replace VNA test ports.
34YK50C Universal Test Port Connector to K (male), Installation requires wrench 01-202 (not included)
34YV50C Universal Test Port Connector to V (male), Installation requires wrench 01-202 (not included)
34YN50 Universal Test Port Connector to N (male), Installation requires wrench 01-202 (not included)
34YS50A Universal Test Port Connector to 3.5 mm (male), Installation requires wrench 01-202 (not included)
34YQ50A Universal Test Port Connector to 2.4 mm (male), Installation requires wrench 01-202 (not included)
Universal Test Fixture (UTF)
3680-20 UTF, DC to 20 GHz
3680K UTF, DC to 40 GHz
3680V UTF, DC to 60 GHz
36801K UTF Right Angle Launcher, DC to 30 GHz
36801V UTF Right Angle Launcher, DC to 50 GHz
36803 Bias Probe
36804B-10M Microstrip Calibration/Verification Kit, 10 mil, DC to 50 GHz
36804B-15M Microstrip Calibration/Verification Kit, 15 mil, DC to 30 GHz
36804B-25M Microstrip Calibration/Verification Kit, 25 mil, DC to 15 GHz
Precision Fixed Attenuators, Adapters (in and out of series, waveguide to coaxial), and more
Refer to our extensive Precision RF & Microwave Components Catalog – 11410-00235
GPIB Cables
2100-5 GPIB Cable, 0.5 m long
2100-1 GPIB Cable, 1 m long
2100-2 GPIB Cable, 2 m long
2100-4 GPIB Cable, 4 m long
Transit Case
760-246-R Transit Case, for all MS4640B Series VNAs, Hard plastic with wheels, 85 cm x 70 cm x 45 cm
Tools
01-201 Torque End Wrench, 5/16 in, 0.9 N·m (8 lbf·in),
For tightening male devices, For SMA, 3.5 mm, 2.4 mm, K, and V connectors.
01-202 Torque End Wrench, 1/2 in, 60 lbf ·in,
For servicing the universal test port, For the removal or installation of a test port.
01-203 Torque End Wrench, 20.6 mm (13/16 in), 0.9 N·m (8 lbf·in),
For tightening the VNA test ports to female devices.
01-204 End Wrench, 5/16 in, Universal, Circular, Open-ended,
For SMA, 3.5 mm, 2.4 mm, K and V connectors.
01-504 Torque End Wrench, 6 mm, 0.45 N·m (4 lbf·in),
For tightening 1 mm connectors.
01-505 6 mm × 7 mm Open End Wrench,
Backing wrench for 6 mm torque wrench above for W1 connectors.
01-511 Torque End Wrench, 4 mm (5/32 in), 0.22 N·m (2 lbf·in),
For tightening the SSMC TEST and REF connectors on 3743A Modules.
Documentation
User Documentation Disc Soft copies of the manuals as Adobe PDF files are included on the User Documentation CD that is provided with
the instrument. The Maintenance Manual PDF is available from Anritsu Customer Service.
All other manuals available as free downloads at www.anritsu.com.
Printed manuals in 3-ring binders are available for a nominal charge.
10410-00317 MS4640B Series VNA Operation Manual (OM)
10410-00318 MS4640B Series VNA Calibration and Measurement Guide (MG)
10410-00319 MS4640B Series VNA User Interface Reference Manual (UIRM)
10410-00320 MS4640B Series VNA Maintenance Manual (MM)
10410-00322 MS4640B Series VNA Programming Manual (PM), for IEEE 488.2, System, and SCPI Commands
10410-00323 MS4640B Series VNA Programming Manual Supplement (PMS), for Lightning 37xxxx and HP8510 Emulation