Atec Anritsu-MS4640B - Manual (Page 42)

42 PN: 11410-00611 Rev. A MS4640B Series TDS
Mechanical Calibration Kits VectorStar™ MS4640B Series
Mechanical Calibration Kits
SMA/3.5 mm Calibration Kit, 3650A Series
3650A cal kit provides 50 Ω calibrations for 3.5 mm or SMA devices using 3.5 mm standards. 3650A-1 cal kit includes Sliding Loads.
K (2.92 mm) Calibration Kit, 3652A Series
3652A cal kit provides 50 Ω calibrations for K devices. 3652A-1 cal kit includes Sliding Loads.
3650A Cal Kit contains: Additional Information (typical) Quantity Part Number
Termination 3.5 mm (male) Return Loss:
> 37 dB (F ≤ 18.5 GHz)
> 30 dB (F > 18.5 GHz)
2 28S50-2
Termination 3.5 mm (female) 2 28SF50-2
Open 3.5 mm (male) Offset: 5 mm 1 24S50
Open 3.5 mm (female) Offset: 5 mm 1 24SF50
Short 3.5 mm (male) Offset: 5 mm 1 23S50
Short 3.5 mm (female) Offset: 5 mm 1 23SF50
Adapter, 3.5 mm (male) to 3.5 mm
(male)
1 33SS50
Adapter, 3.5 mm (female) to 3.5 mm
(female)
2 33SFSF50
Adapter, 3.5 mm (male) to 3.5 mm
(female)
2 33SSF50
Torque Wrench 5/16 in, 0.9 N·m (8 lbf·in) 1 01-201
Wrench, Universal For SMA, 3.5 mm, 2.4 mm, K and V Connectors 1 01-204
Pin Depth Gauge 1 01-222
Adapter (female) for Pin Gauge 1 01-223
Reference Flat 1 01-210
Connector Thumb Wheel 4 A18311
Coefficients for standards Provided on a USB memory device and 3.5 in floppy disk 1 –
3650A-1 Cal Kit adds: Additional Information (typical) Quantity Part Number
Sliding Termination 3.5 mm (male) 1 17S50
Sliding Termination 3.5 mm (female) 1 17SF50
Flush Short (male) 1 01-211
Flush Short (female) 1 01-212
3652A Cal Kit contains: Additional Information (typical) Quantity Part Number
Termination K (male) Return Loss:
> 34 dB (F ≤ 18.5 GHz)
> 32 dB (F ≤ 40 GHz)
2 28K50A
Termination K (female) 2 28KF50A
Open K (male) Offset: 5 mm 1 24K50
Open K (female) Offset: 5 mm 1 24KF50
Short K (male) Offset: 5 mm 1 23K50
Short K (female) Offset: 5 mm 1 23KF50
Adapter, K (male) to K (male) 1 33KK50B
Adapter, K (female) to K (female) 2 33KFKF50B
Adapter, K (male) to K (female) 2 33KKF50B
Torque Wrench 5/16 in, 0.9 N·m (8 lbf·in) 1 01-201
Wrench, Universal For SMA, 3.5 mm, 2.4 mm, K, and V Connectors 1 01-204
Pin Depth Gauge 1 01-222
Adapter (female) for Pin Gauge 1 01-223
Reference Flat 1 01-210
Connector Thumb Wheel 4 A18311
Coefficients for standards Provided on a USB memory device and 3.5 in floppy disk 1 -
3652A-1 Cal Kit adds: Quantity Part Number
Sliding Termination K (male) 1 17K50
Sliding Termination K (female) 1 17KF50
Flush Short (male) 1 01-211
Flush Short (female) 1 01-212