Alpha Technologies Te43 - Manual (Page 49)

THESE DESIGNS AND SPECIFICATIONS ARE CONFIDENTIAL, REMAIN
THE PROPERTY OF ARGUS TECHNOLOGIES LTD., AND SHALL NOT
BE COPIED OR USED WITHOUT ITS WRITTEN CONSENT.
TYPE
D2
1
0.5
0.05
0.5
[ 0.040]
[ 0.020]
[ 0.002]
UNITS: mm [in]
X [X.X]
X.X [X.XX]
X.XX [X.XXX]
ANGULAR: SCALE:
OF
2009 ARGUS TECHNOLOGIES
TITLE:
ISSUE
DATE
SIZE
B
DWG NO.
CUSTOMER CONNECTION,
KIT, INTRFC, w/ CBL SET,
BATT TO BATT, Te4x
747-603-08
SHEET
NTS
REV
P/A
5 7
CONNECT X2 #4/0 AWG
(-) CABLES
OBSERVE PROPER BUS POLARITY ON THIS SIDE!
DETAIL A - FRONT BATTERY CHARGE
TERMINATION PANEL CONNECTIONS
ON 2nd Te40 ENCLOSURE
(+24V SYSTEM SHOWN)
BATTERY CHARGE
TERMINATION PANEL
CONNECT INTERFACE CABLES TO THEIR RESPECTIVE (+) AND (-) BUS BARS ON
CHARGE TERMINATION PANEL USING 3/8" HARDWARE SUPPLIED AS SHOWN.
ENSURE CORRECT POLARITY IS OBSERVED WHEN MAKING CONNECTIONS.
USE A MULTIMETER TO CHECK ALL TERMINATIONS BEFORE CONNECTING
BATTERIES AND APPLYING POWER TO THE SYSTEM.
CONNECT X2 #4/0 AWG
(+) CABLES
OBSERVE PROPER BUS POLARITY ON THIS SIDE!
BATTERY ENCLOSURE (Te40) TO BATTERY ENCLOSURE (Te40)
INTERFACE CABLE ROUTING & CONNECTIONS CONT'D: