Alpha Technologies Te43 - Manual (Page 16)

Alpha Technologies Ltd. 057-104-C0 Rev B WC
Burnaby, British Columbia. Telephone: 604 436 5900 Fax: 604 436 1233. Page 11 of 27
3 Transportation and storage
3.1 Packaging
The enclosure and components are shrink wrapped and shipped on individual pallets. The enclosures and
components must not be stacked on top of each other.
The pallet is approximately 0.15 m H x 1.22 m W x 1.22 m D (6" H x 48" W x 48" D). The overall height including
the pallet and enclosure is approximately 2.3 m (91").
Batteries are shipped on a separate pallet and packaged according to the manufacturer ’s guidelines. Packaging
assemblies and methods have been tested to International Safe Transit Association standards.
3.2 Storage
The weight of the enclosure is written in the specifications. The equipment pallet can be moved using a forklift.
3.3 Site Considerations
The site should be ready for the enclosure installation before the enclosure arrives. A lift truck or crane is required
to lift and position the enclosure and its components. Make sure that there are no potential obstructions in the
transport path. Use safe lifting practices.
3.4 Inspection
Before unpacking the equipment, perform a visual inspection and note any damage. Unpack the equipment and
inspect the exterior for damage. Continue the inspection for potential internal damage. Contact the carrier
immediately if internal damage is detected. Then contact Alpha Technologies for advice on the consequence of
any damage.
Verify that you have all the required parts before proceeding with the installation.
Call Alpha Technologies if you have any questions: 1-888-462-7487