26 data log menu 26, Data log menu 26, Data logging notes 26 – Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Setup Programming Guide User Manual

Page 153: 26 data log menu, Data log menu

Data Log Menu

Page

26 - 1

Data Log Menu

MENU

Press this key and follow the

highlighted sequence below

Contents:
Data Log Menu
Data Logging Notes

See the Table of Contents to find topics in
this manual. See the Preface for general
information about this manual. See the
Installation, Operator’s, TroubleShooting
Guides and Application Notes for other
reference sources.

Data Logging Notes

This menu can be ignored

unless

diagnostic

tank data is required.

•

In order to access this menu:

a 9 pin

communications cable must be plugged
into Comm Port 1 or Comm Port 2 at the
Tank Sentinel console (the other end plugs
into a serial communications port of a IBM
compatible computer).

This must be done with power off at the
computer and Tank Sentinel console.

•

Instructions and requirements about this
feature will be supplied by INCON Technical
Service.

Press a menu select key (

thru

) to

choose a tank. Use

DOWN

for more

tanks (TS-2001/508 consoles can monitor
up to 8 tanks).

SELECT DATALOG

START

STOP ...(Ends Data Logging)

START DATALOG

(MORE)

TANK 1

TANK 2

TANK 3

...TANK 8

SELECT DATALOG

START

STOP

DATALOG

COMM 1

COMM 2

SELECT MENU OPTION

SETUP

UPGRADE LANGUAGE

DATALOG