Programming i/o module operation p, Interfacing ts-lld to tank gauge p, Interfacing ts-lld to tank gauge – Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Setup Programming Guide User Manual

Page 15

PREFACE

Page

P - vii

Standard and

Optional

Output Devices

NOTE

ProgrammingI/O Module Operation

The TS-CIM / TS-IEM channels * can function either as an input or an output module. The
mode menu option allows selection of the channel operation — this must correspond to the
type of module that is inserted into the channel. Input mode must be selected for input
modules, and output mode must be selected for output modules.

Reference the Chapter

about

IO MODULE

setup programming.

Aux. Inputs are always inputs and cannot be changed because the input circuitry
is hard-wired.

Reference the Chapter about

AUX INPUT

setup programming.

Interfacing TS-LLD to Tank Gauge

In order to interface the

INCON

TS-LLD line leak detector(s) to the TS-1001/504 / 2001/

508 / Tank Sentinel consoles —

Use the TS-LLD interface terminals within the console

(providing RS-485 bidirectional

communication). The first TS-LLD is wired to the tank gauge and the others are connected
to each other (1 to 2, 2 to 3... ).

LLD

is available with Tank Sentinel software version #

1.10 and higher ( check options –

must be in the part number ).

Standard Output Devices:

Modulated Annunciator

Solid Annunciator

Relay 1

Relay 2

Optional Output Devices:

TS-ROM Relay 1

TS-ROM Relay 2

TS-ROM Relay 3

TS-ROM Relay 4

TS-ROM Relay 5

TS-ROM Relay 6

TS-ROM Relay 7

TS-ROM Relay 8

Optional (TS-CIM / TS-IEM) Output Devices

I/O Module Output 1*

I/O Module Output 2*

I/O Module Output 3*

I/O Module Output 4*

I/O Module Output 5*

I/O Module Output 6*

I/O Module Output 7*

I/O Module Output 8*

I/O Module Output # 9* I/O Module Output # 10*

I/O Module Output # 11* I/O Module Output # 12*

I/O Module Output # 13* I/O Module Output # 14*

I/O Module Output # 15* I/O Module Output # 16*

I/O Module Output # 17* I/O Module Output # 18*

Note

: The TS-2001 will list the

TS-CIM Output Modules as I/0
Module - Outputs # 17 through
# 24 (if installed).

I/O Module Output # 19* I/O Module Output # 20*

I/O Module Output # 21* I/O Module Output # 22*

I/O Module Output # 23*

I/O Module Output # 24*

