Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Setup Programming Guide - Manual (Page 135)

TS-TPI Setup Programming Page 23 - 1 23
23 TS-TPI SETUP PROGRAMMING
TPI Menu
H U
MENU
×
Press this key and follow the
7 highlighted sequence below ....
Contents:
Enable TPI Menu
TPI Pump Menu
Auto-Config Note
Number of Pumps Menu
Pump Menu
TPI Group Menu
Mode Configuration Note
Reserve Configuration Note
Mode Type and Reserve Note
Exiting Setup Mode
Prior to Enabling TPI, the System
configuration for Number of Tanks is
required.
Character input / editing:
• Use ▲ UP or DOWN ▼ keys to display more
menus - (MORE) or selections (UP /DN)
• Press the CANCEL key to cancel data entry
• Press the ENTER key to accept data entry
• Press menu keys ( M1 to M4 ) to access
menus.
• Press M4 to backspace (delete) one or more
characters to the left
ï
TPI ENABLE (user entry)
TPI may be aligned with any of the menu keys
(
M1 — M4 ), depending on what other features
are programmed or enabled. For this example,
TPI is aligned with the
M1 key ....
Press the M1 key to display the TPI menu.
Here is the main TPI menu display.
Press the M1 key to display the TPI ENABLE
user entry field. The default selection is NO.
Use the UP / DOWN ▲ ▼ keys to change the
selection to YES. Choose YES to enable TPI
programming and subsequent menus.
Press the ENTER key to accept data entry.
The display returns to the TPI menu, which
now shows the PUMP and GROUP menus.
Press the DOWN ▼ key several times....
SETUP MENU (MORE)
EXIT SYSTEM TANKS PROBES
SETUP MENU (MORE)
T P I
M1 M2 M3 M4
TPI ENABLE (UP/DOWN)
N O
Press the M1 key to display the SETUP menu.
TPI ENABLE (UP/DOWN)
Y E S
SELECT MENU OPTION (MORE)
S E T U P UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
TPI
ENABLE P U M P G R O U P
NOTE
☞
TPI
E N A B L E
M1 M2 M3 M4