beautypg.com

Extron Electronics MLC 60 Series User Guide User Manual

Page 24

background image

VOLUME

Extron

DISPLAY

VIDEO

PC

ON

OFF

Figure 14.

Removing the Faceplate (MLC 60 Series D Models)

2.

If you are switching faceplates, transfer the buttons from the faceplate you removed
to the replacement one.

3.

Make any desired button changes (see “

Replacing Buttons

,” later in this section).

4.

To attach the faceplate, make sure that both the faceplate and the MLC board are
upright and line up the pegs in upper-left and lower-right corners on the back of the
faceplate with the two diagonal holes on the MLC board.

5.

Press the faceplate onto the board with the pegs in the holes until the tabs at the top
and bottom of the faceplate snap into their slots on the board (see the illustration
below).

VOLUME

DISPLA

Y

OFF

ON

MUTE

LAPTOP

VIDE

O

PC

Insert peg
on faceplate
into hole.

Peg

Insert peg
on faceplate
into hole.

Insert tab on faceplate
into slot.

Tab

Figure 15.

Attaching the Faceplate (MLC 60 Series D Models)

MLC 60 Series MediaLink Controllers • Features, Installation, and Operation

18