Extron Electronics MLS 608 D Series User Guide - Manual (Page 81)

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Power Save Mode
Turn power save off E 0PSAV} PsavX3$]
Turn power save on E 1PSAV} PsavX3$]
View power save E PSAV} X3$] View power save status.
Front panel security lockout (Executive Mode)
Enable Executive mode 1 1X Exe1] Lock out front panel
buttons and knobs.
Enable Executive mode 2 2X Exe2] Lock out front panel
buttons only.
Disable Executive mode 0X Exe0] Unlock all front panel
controls.
View Executive mode
status X 0 ] (or) 1 ]
(or) 2 ] View the current status:
0 = off [default]; 1 =
on, lock all buttons and
knobs; 2 = on, lock input
buttons only.
Information Requests
View firmware
version Q or 1Q x.xx] View the firmware
version.
View part number N X3&] View the part number
X3&.
View AV input I VidX!•AudX!] View current AV input.
View model name 1I X3*] View model name X3*.
View video signal
presence LS X3( *X3(*X3(*X3(*X3(*X3(*
X3( *X3(]
Shows signal presence
for all inputs, 1-8.
View +1.5V FPGA
voltage 15S +X4)]
View internal temp
in °C 20S +X4!]
View audio mute
to DSP 40S X4@]
NOTE:
X! = Input selection: 0-8, 0 = no connection
X3$ = Power save mode: 0 = off (default), 1 = on
X3& = Device part number: 60-1050-01 = MLS 608 D, 60-1050-02 = MLS 608 D MA, 60-1050-03 = MLS 608 D SA
X3* = MLS 608 D, or MLS 608 D MA, or MLS 608 D SA
X3( = Video signal status: 0 = video /TMDS not detected, 1 = video /TMDS detected, - = unknown
X4) = Voltage in volts (V)
X4! = Temperature in degrees C, response is three digits with leading zeros (for example 031 = 31°C)
X4@ = Audio mute to DSP: 0 = audio unmuted, 1 = audio muted
MLS 608 D Series • SIS Programming and Control 75