Extron Electronics MLS 608 D Series User Guide User Manual
Page 77
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Output Bass Adjustment (Group Master 3)
Set gain (dB)
E
D3*X2)GRPM}
GrpmD
03
*X2)]
Set the gain value X2)
for group master 3.
Example: ED3*24
0
GRPM}
GrpmD
03
*+
00240
]
Sets the gain value to
+24 dB.
Example: ED3*
0
GRPM}
GrpmD
03
*+
00000
]
Sets the gain value to
0 dB.
Example: ED3*-1
00
GRPM}
GrpmD
03
*-
00100
]
Sets the gain value to
-10 dB.
Increment gain
E
D3*X&+GRPM}
GrpmD
03
*X2)]
Increase the gain value
X2) by X&.
Decrement gain
E
D3*X&-GRPM}
GrpmD
0
3*X2)]
Decrease the gain value
X2) by X&.
View master value
E
D3GRPM}
X2)]
View master bass output
value X2).
Output Treble Adjustment (Group Master 4)
Set gain (dB)
E
D4*X2)GRPM}
GrpmD
04
*X2)]
Set the gain value X2)
for group master 4.
Example: ED4*24
0
GRPM}
GrpmD
04
*+
00240
]
Sets the gain value to
+24 dB.
Example: ED4*
0
GRPM}
GrpmD
04
*+
00000
]
Sets the gain value to
0 dB.
Example: ED4*-1
00
GRPM}
GrpmD
04
*-
00100
]
Sets the gain value to
-10 dB.
Increment gain
E
D4*X&+GRPM}
GrpmD
04
*X2)]
Increase the gain value
X2) by X&.
Decrement gain
E
D4*X&-GRPM}
GrpmD
04
*X2)]
Decrease the gain value
X2) by X&.
View master value
E
D4GRPM}
X2)]
View master treble
output value X2).
Overall Output Volume Mute Setting (Group Master 5)
NOTE:
This command mutes the program and mic audio. It does not mute the embedded audio on the HDMI output signal.
Set volume mute
E
D5*X4(GRPM}
GrpmD
05
*X4(]
Set the volume mute X4(
for group master 5.
View master value
E
D5GRPM}
X5)]
View master volume
mute value X5).
Audio Input Format
NOTE:
For audio inputs 5-8.
Selects between analog (5-pole captive screw) or digital (embedded in HDMI input).
Set format
E
DX1)*X1!AU}
DsDX1)*X1!]
Sets audio input X1) to
format X1!.
View format
E
DX1)AU}
X1!]
View audio format X1!
for input X1).
NOTE:
X& = Increment and decrement dB values: in 0.1 dB steps (multiply by 10, for example 10 = 1.0 dB).
X1) = Inputs 5-8: 5 = 30008, 6 = 30010, 7 = 30012, 8 = 30014
X1! = Audio format: 0 = analog, 1 = digital (default setting)
X2) = Output bass/treble master value: 240 to -240, default 0, decibel value multiplied by 10.
For example 230 = +23 dB, -210 = -21 dB.
X4( = Mute status: 0 = mute off, 1 = mute on (default)
X5) = Mute value: +00000 = off, +00001 = on (default)
MLS 608 D Series • SIS Programming and Control
71