Extron Electronics ISS 108 - Manual (Page 63)

4-17 Integration Seamless Switcher • Programmer’s Guide
Command/response table for special function SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Auto Image
Set Auto Image X3 *13# Img X3 00 = off.
01 = on.
Example: 1*13# Img01 Set Auto Image on .
Execute Auto Image X18 *14# Img X18 X18 : Auto Image input tied to
output:
Prog/Prev
Prog/Prev
01 = Yes/No 03 = Yes/Yes
02 = No/Yes
X2 Reconfig Output X2 Auto Image complete.
X2 Reconfig Output X2 Auto Image complete.
If Auto Image adjustments are not necessary for an input, the
X2
Reconfig message may not be
received.
If both outputs are receiving the same input, both outputs are auto imaged regardless of the
X18
received.
PAL film mode
Set PAL film mode X1 * X3 *18# X1 Flm X3 X3 : 0 = off.
1 = on.
Example: 8*1*18# 8Flm01 The ISS uses its 2:2 pulldown
(PAL) video processing
algorithms to scale input 8.
Read PAL film mode X1 *18# X3 0 = off.
1 = on.
Preview switch mode
Set preview switch mode X26 *20# Psm X26 X26 : 0 = stay mode.
1 = swap mode.
Example: 1*20# Psm01 The ISS swaps the preview and
program outputs when you
perform a cut or dissolve
operation.
Read preview switch mode 20# X26 0 = stay mode.
1 = swap mode.