Extron Electronics ISS 108 - Manual (Page 27)

3-5 Integration Seamless Switcher • Operation
On figure 3-4 and all other flowcharts in this chapter, solid lines indicate
screen changes initiated by the operator. Dashed lines indicate screen changes
that are the result of a timeout function.
2
sec.
2
sec.
2
sec.
2
sec.
Extron Electronics
ISS 408
Integration
Seamless Switcher
Extron Electronics
ISS 408
60-423-01
Version x.xx
Program #1 RGB
0.00 kHz 0.00Hz
Preview #3 S-Video
0.00 kHz 0.00Hz
Output Rate
1280 x 1024 @ 60
Power
on
Default Display Cycle
Figure 3-4 — LCD power up and default display cycle
Selecting an input and switching it to the program output
1 . Press and release the Video/Audio button as necessary to select either video
and audio, video only, or audio only (figure 3-5).
VIDEO
AUDIO
Press the button to cycle
through the selections.
The video LED lights green
when video is selected.
The audio LED lights red
when audio is selected.
Figure 3-5 — Selecting video and audio
2 . Press and release an input button (figure 3-6).
LED key:
= on, = blinking, = off
3 4 5 6 7 8 VIDEO CUT
DISSOLVE
3 4 5 6 7 8 AUDIO
Press and release the input 3 button.
The Input 3 video (upper) LED and Input 3 audio (lower) LED
blink to indicate that the video and audio inputs are selected,
the video is scaled, and output as the preview output.
The Input 6 video (upper) LED and Input 6 audio (lower) LED
remain lit steadily to indicate that the video and audio inputs
are selected, the video is scaled, and output as the program
output.
Figure 3-6 — Selecting an input