Extron Electronics ISS 108 - Manual (Page 53)

4-7 Integration Seamless Switcher • Programmer’s Guide
Dur
X20
A front panel dissolve speed adjustment has occurred. Dissolve speed affects the
duration of the dissolve function when switching the preview output to the
program output.
X20
is the delay value, in 0.01 second steps.
X20
can be as much as
50 = 5.0 seconds.
Test pattern
Tst
X21
*
X22
A test pattern has been turned on or off for one or both outputs from the front
panel.
X21
is the on/off status for either or both outputs and
X22
is the test pattern
selected.
Audio gain and attenuation
X1
Aud
X23
A front panel audio input level adjustment has occurred.
X1
is input number and
X23
is the audio gain or attenuation level.
Output video and audio mute
X?
Vmt
X3
A front panel video mute operation has occurred.
X?
is the output and
X3
is the
mute status: 0 =off (video not muted), 1 = on (video muted).
X?
Amt
X3
A front panel audio mute operation has occurred.
X?
is the output and
X3
is the
mute status: 0 =off (audio not muted), 1 = on (audio muted).
Preview switch mode
Psm
X26
A front panel audio input level adjustment has occurred.
X26
is the stay or swap
status for preview switch mode. See Preview Switch Mode submenu in chapter 3,
Operation, for a description of the two switch modes.
PAL film mode
X1
Flm
X3
The PAL film mode has been selected or deselected from the front panel for the
selected input.
X1
is input number and
X3
is the on/off status for PAL film mode.