Extron Electronics ISS 108 - Manual (Page 29)

3-7 Integration Seamless Switcher • Operation
Recalling a user preset
There are three user presets per input. The presets save color, tint, contrast,
brightness, detail, sizing, and centering settings. See User Presets menu later in this
chapter to save and erase presets. Cycle through and recall these memories by
repeatedly pressing the appropriate input button. The LCD panel identifies the
recalled preset (figure 3-9).
3
3
3
3
Press Button
User Preset #2
Recalled
User Preset #3
Recalled
User Preset #1
Recalled
User Preset #2
Recalled
3
3
Press Button
3
3
Press Button
Figure 3-9 — Recalling user presets
Auto imaging an input
The auto imaging feature automatically sizes and centers the selected input to fill
the screen. Command the auto imaging feature for a specific input by pressing and
holding
the appropriate input button until the LCD displays the message
Auto Image Input #n , releasing the input button, and then pressing and releasing
the input button again. The LCD displays AutoSizing and Centering Please
Wait...
until the operation is complete. Alternatively, using the menu system, this
feature can be set to apply the Auto Image adjustments to every input as it is
selected (see Auto Imaging and Auto Memories submenu later in this chapter).