Extron Electronics DVS 304 Series User Guide - Manual (Page 75)

Passwords Page
The fields on the Passwords page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to 12 upper case and lower case
alphanumeric characters. Each password must be entered twice: once in the Password
field and then again in the Re-enter Password field. Characters in these fields are masked
by asterisks (*****).
If you do not want to password protect an access level, leave the Password field and the
Re-Enter password field blank. After entering the desired password in both fields, click the
Submit button.
As shown in the figure below, password-protected connections allow two levels of
protection: administrator and user. Administrators have full access to all DVS 304
switching capabilities and editing functions.
Figure 43. Passwords Page
Please keep in mind that
• Connecting via an Ethernet connection, entering SIS commands (see “SIS
Communication and Control” chapter ) or using the control program to access the
DVS 304 is password protected.
• Connecting via the RS-232 port, entering SIS commands or using the control program
to access the DVS 304 is not password protected.
NOTE: An administrator password must be created before a user password can be
created.
To clear an existing password so that no password is required, delete the asterisks in the
Password field and enter a single space in the field. Click the Submit button.
DVS 304 Series • Ethernet Control 70