Extron Electronics DVS 304 Series User Guide - Manual (Page 61)

Using the SPPCP
The Signal Processing Products Control Program (SPPCP) is used to configure and operate
the DVS from the PC on which the program resides.
Orientation
The SPPCP main window has three tabs: Control, I/O Configuration, and Advanced
Settings.
Figure 30. The Control Program Main Window
The menu bar on the main window shows File, Options, Tools, and Help. Click
on each as desired.
At the bottom of the window is the status bar, indicating the status of the connection or
any configuration error messages.
NOTE: For detailed Signal Processing Product Control Program instructions when the
program is open, press F1 or click on Help, Contents.
DVS 304 Series • SIS Communication and Control 56