Extron Electronics DVS 304 Series User Guide - Manual (Page 64)

If the sync to matrix script needs to be removed or updated, click Remove Sync
Scripts.
• System Settings... — Select this to open a secondary window. This allows changes
to be made to various device settings: IP and RS-232 connections, date/time, and
passwords. Select the applicable tab, change the settings as desired, and click
Submit to make the changes effective.
NOTE: Changing the IP settings may result in loss of connection to the LAN
Figure 32. Systems Settings Window
Only the baud rate can be changed when selecting the RS-232 tab.
Click Cancel or the X in the window’s top right corner to exit without changes.
• Reset — If it is necessary to reset the DVS 304,
select this to open a secondary drop-down box.
Three options are available: Reset Audio Input
Levels Reset Picture, Image, Position and Size Controls and Reset to Factory Defaults.
Reset Audio Input Levels resets the audio input levels to the default settings.
Reset Picture, Image, Position, and Size Controls resets all picture controls to their
default settings.
Reset to Factory Defaults resets all settings on the device to their factory defaults,
including all video and audio settings, and clears all configuration files from the
device.
Select any reset option as desired.
• Update Firmware... — Selecting this opens the Firmware Loader application (where
already installed on a connected PC). The Firmware Loader only uploads new firmware
to the device through a TCP/IP connection.
In order for the Update Firmware function to work, the Firmware Loader application
must be installed on the connected PC. If already installed, skip steps 1 through 4.
DVS 304 Series • SPPCP 59