Extron Electronics DVS 304 Series User Guide - Manual (Page 21)

Audio Configuration (Audio Models Only)
Audio Configuration allows the input level to be adjusted between –15 dB to +9 dB for
each audio input.
NEXT
IN1 LEVEL
0dB
NEXT
Input level
Adjust the input
gain/attenuation from
-15dB to +9dB of the
selected input.
MENU
(audio models only)
AUDIO
CONFIG
OUTPUT
CONFIG
Figure 16. Audio Configuration Menu
Overall volume control is available through SIS commands or IR remote control.
Memory Preset
The memory preset feature saves the current values for image parameters such as color,
tint, contrast, brightness, detail, aspect ratio, horizontal start, vertical start, horizontal
active, vertical active, phase, total pixels, horizontal position, vertical position, horizontal
size, vertical size, and zoom.
The following flowchart provides an overview of the Memory Preset submenus and the
options for each setting.
NEXT
IN1 SAVE
1 2 3
IN1 CLEAR
1 2 3
NEXT NEXT
Saving (SAVE) memory presets
• Save the currently selected input's
picture control information.
• Up to 3 presets per input can be
selected < > and saved.
N/A is the default.
• Save a preset by pressing the Next
button.
Clearing (CLR) memory presets
• Clear the currently selected input's
saved preset.
• Up to 3 presets per input can be
selected < > and cleared. N/A is
the default.
• Clear a preset by pressing the Next
button.
MEMORY
PRESETS
MENU
AUDIO
CONFIG
(Audio models only)
NOTE: The presets will only save the sizing, centering, and picture control information.
Memory Preset 3 per input (12 total)
Phase Aspect ratio Film mode H/V Start
Zoom Total pixels H/V Active H/V Pan
H/V Size Bright/Cont Detail H/V Position
Color/Tint
Figure 17. Memory Preset Options
DVS 304 Series • Operation 16