Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 78)

Operation Multi 3500i
76
4.9 Transmitting data (RS 232 interface)
4.9.1 Options for data transmission
Via the RS 232 interface, you can transmit data to a PC or an external
printer. The following table shows which data are transmitted to the in-
terface in which way:
Note
The following rule applies: With the exception of the menus, shortly
pressing the key generally outputs the display contents to the
Data Control Operation / description
Current
measured values
of all connected
sensors Manual z By pressing short-
ly.
z Simultaneously with every
manual data storage pro-
cess (see section 4.8.1).
Automatic, at
intervals z By pressing for a
long time. Then you can
set the transmission inter-
val.
z Simultaneously with every
automatic data storage
process (see
section 4.8.2).
Stored measured
values Manual
z Displayed dataset with
after calling up
from the data storage.
z All datasets according to
the filter criteria via the
Output to RS232 function.
For details, see section 4.8.3.
Calibration records Manual z Calibration record of a sen-
sor with (after call-
ing up from the data
storage or at the end of a
calibration).
z All calibration records after
calling up from the data
storage via the Output to
RS232 function.
For details, see section 4.8.5
Automatic z For the respective sensor
at the end of a calibration.