beautypg.com

Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS User Manual

Page 101

background image

Multi 3500i

Lists

99

Measured value

The measured value is the special value of a measured parameter to
be determined. It is given as a combination of the numerical value and
unit (e. g. 3 m; 0.5 s; 5.2 A; 373.15 K).

Measured variable

The measured parameter is the physical dimension determined by
measuring, e. g. pH, conductivity or DO concentration.

Measuring system

The measuring system comprises all the devices used for measuring,
e. g. measuring instrument and sensor. In addition, there is the cable
and possibly an amplifier, terminal strip and armature.

Molality

Molality is the quantity (in Mol) of a dissolved substance in 1000 g sol-
vent.

MultiCal

®

WTW name stating that a measuring instrument provides several cal-
ibration procedures.

Offset potential

The measurable potential of a symmetrical electrode, the membrane
of which is immersed in a solution with the pH of the nominal electrode
zero point. The asymmetry is part of the offset potential.

ORP voltage

The ORP is caused by oxidizing or reducing substances dissolved in
water if these substances become effective on an electrode surface
(e. g. a gold or platinum surface).

OxiCal

®

WTW name for a procedure to calibrate DO measuring systems in wa-
ter vapor saturated air.

pH value

The pH is a measure of the acidic or basic effect of an aqueous solu-
tion. It corresponds to the negative decadic logarithm of the molal hy-
drogen ions activity divided by the unit of the molality. The practical pH
value is the value of a pH measurement.

Potentiometry

Name of a measuring technique. The signal (depending on the mea-
sured parameter) of the electrode is the electrical potential. The elec-
trical current remains constant.

Reference

temperature

Fixed temperature value to compare temperature-dependent mea-
sured values. For conductivity measurements, the measured value is
converted to a conductivity value at a reference temperature of 20 °C
or 25 °C.

Reset

Restoring the original condition of all settings of a measuring system.

Resistance

Short name for the specific electrolytic resistance. It corresponds to
the reciprocal value of the electrical conductivity.

Resolution

Smallest difference between two measured values that can be dis-
played by a measuring instrument.