Xylem MULTI 3500i HANDHELD MULTIPARAMETER METERS - Manual (Page 14)

Commissioning Multi 3500i
12
3.3 Initial commissioning
Perform the following activities:
z For mains operation and charging the batteries: Connect the plug-in
power supply unit (see section 3.2 P OWER SUPPLY ).
z Switch on the measuring instrument (see section 4.1)
z Set the language (see section 4.2.3)
z Set the date and time (see section 4.2.4)
Note
When you set the language, date and time according to the mentioned
sections of this operating manual you will quickly be familiar with the
simple operation of the Multi 3500i.
1 If necessary, replace the Euro plug (1) on the plug-in power
supply unit (2) by the country-specific plug suitable for your
country.
2 Connect the plug (3) to the socket (4) of the measuring instru-
ment.
3 Connect the plug-in power supply unit to an easily accessible
mains socket.
4
3
1
2