Bell & Gossett S13641B Technologic 5500 Series Pump Controller - Manual (Page 17)

17
3.13 DATE/TIME SETUP
3.13.1 See the following table for all date/time menu items.
DATE/TIME MENU ITEMS
Field
Menu Item Variable Default Range Value
Date/Time MM
Enter the current month using both digits,
example Jan. should be entered as 01.
Date/Time DD
Enter the current date using both digits,
example the 6th should be entered as 06.
Date/Time YYYY
Enter the current year using all 4 digits.
Date/Time HH
Enter the hours using the 24 hour format,
example 9:00 p.m. should be entered as 21.
Date/Time MM
Enter the minutes using both digits.
Date/Time Display 24 Hour Format: ? (Y/N) N Y or N
Enter yes to display the time in the 24 hour format.
Enter no to display the time in AM/PM format.
Date/Time Daylite Savings Tm: ?(Y/N) N Y or N
Enter yes for automatic set back during daylight savings time.
Enter no to disable the automatic setback during daylight savings time.
3.14 PASSWORD SETUP
3.14.1 See the following table for all PASSWORD menu
items table
missing.
➞
PASSWORD MENU ITEMS
Field
Menu Item Variable Default Range Value
Password ENABLE PASSWORD TO SETUP MENU: ? N Y or N
Enter yes for password protection of the entire setup menu.
Password ENABLE PASSWORD TO SET POINT MENU: ? N Y or N
Enter yes for password protection of the entire set point menu.
New Password ENTER NEW PASSWORD
> _ _ _ _ _ _<
None 0-999999
If either of the above are set to yes this screen prompts the
user to define the password.
Verify VERIFY THE PASSWORD
PASSWD >_ _ _ _ _ _<
After entering data in password definition screen this screen
requires the user to confirm the requsted password. If the
confirmed number does not agree with the first number the
Enter New Password screen is repeated to allow the user
to get both input screens to agree.