Xylem handylab multi 12 - Manual (Page 78)

Lists handylab multi 12
78 ba75371e03 11/2009
Sample Designation of the sample ready to be measured. Normally, a test
sample is made by processing the original sample. The test sample
and original sample are identical if the test sample was not processed.
Setting the
temperature
compensation
Name of a function that considers the temperature influence on the
measurement and converts it accordingly. Depending on the mea-
sured parameter to be determined, the temperature compensation
functions in different ways. For conductimetric measurements, the
measured value is converted to a defined reference temperature. For
potentiometric measurements, the slope value is adjusted to the tem-
perature of the test sample but the measured value is not converted.
Slope The slope of a linear calibration function.
Slope (relative) Designation used in the D. O. measuring technique. It expresses the
relationship of the slope value to the value of a theoretical reference
probe of the same type of construction.
Standard solution The standard solution is a solution where the measured value is
known by definition. It is used to calibrate a measuring system.
TDS Total dissolved solids
Temperature
coefficient
Value of the slope of a linear temperature function.
Temperature function Name of a mathematical function expressing the temperature behav-
ior of a test sample, a probe or part of a probe.