Xylem handylab multi 12 - Manual (Page 48)

Operation handylab multi 12
48 ba75371e03 11/2009
Note
If you want to search for a certain element of the data record (e.g. date), pro-
ceed as follows:
Outputting stored
data to the
interface
Note
You can cancel the transmission with or .
The transmitted data contains the entire contents of the storage in increment-
ing order of the location numbers.
1 Using , select the element (e.g. date).
2 Press <
▲> or <▼> repeatedly until the required element ap-
pears on the display.
After approx. 2 s the temperature of the displayed measured
value appears.
1 Press the key repeatedly until Sto SEr appears on the
display.
2 Press the key.
The complete contents of the storage are transmitted to the in-
terface. During the data transmission the instrument incre-
ments the storage numbers. After the data transmission, the
instrument automatically switches to the last active measure-
ment mode.
Store Auto
Ident
S 1
LoBat
Tref25
nLF
/ K %
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/ cm
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Year
R
S t o
S E
RCL